NO:524576,Loewe, padded 3D embroidered round neck sweater Fabric selection Fabric selection Fabric selection is made of wool blended fabric, mainly 96 wool, combined with 3 nylon and 1 spandex, the wool main body ensures the warmth and comfort of the clothes. The addition of a small amount of nylon and spandex significantly improves the elasticity and wear resistance. The ribbed decorative parts are made of wool, further improving the texture and wear experience. Craft 1 The fabric and padded material are tightly fixed on the frame of the embroidery machine. The embroidery machine uses sparse stitches along the plate mark of the padded layer to outline the filling area of the pattern, and then runs the plate mark of the covering layer, and perfectly covers the foam padded layer with dense stitches, thus forming a slightly raised Anagram embroidery, which feels soft and full, and the thick thread layer plays a protective role, greatly improving its wear resistance. Craft 2 Add detergent and perform preliminary rinsing at a water temperature of about 35 degrees to remove impurities in the production process. Then gently digest the feathers on the surface through protease, reduce the tendency to pill from the root, improve the feel, retain softness, and eliminate irritation. Finally, after dehydration and drying, the size and shape stability are improved. Size S-XL, loewe, sweaters, 19860909Loewe,垫衬3D刺绣圆领毛衣 面料选择 面料选择采用了羊毛混纺面料,以96的羊毛为主,结合了3的锦纶和1的氨纶,羊毛主体保证了衣物的保暖性和舒适度,少量锦纶与氨纶的加入使弹性和耐磨性得到显著提升.罗纹装饰部件则选用了羊毛,进一步提升了质感与穿着体验. 工艺1 将面料和垫衬材料一同紧绷地固定在绣花机框架上,绣花机沿着垫衬层的版迹运用较稀疏的针迹勾勒出图案的填充区域,紧接着运行覆盖层的版迹,用密集的针迹完美地覆盖在泡沫垫衬层之上,从而形成微凸起的Anagram刺绣,触感柔软且饱满,厚厚的线层起到了保护作用,使其耐磨性大大提升 工艺2 加入洗涤剂,将大货在约35度的水温下进行初步漂洗,去除生产过程中的杂质,再通过蛋白酶温和的消化掉表面的毛羽,从根源上减少起球倾向,改善手感,保留柔软度,消除刺激感.最后通过脱水和烘干处理之后,提升尺寸和形状稳定性 尺码S-XL,,loewe,sweaters, ,Men's clothing