NO:746775,Loewe wool blend shirt jacket fabric options Using carefully proportioned blended fabrics, wool provides natural warmth and a crisp silhouette, mohair gives the fabric a fine and fluffy velvety feel, and a small amount of nylon is added to enhance wear resistance and wrinkle resistance. The three are combined to create an ideal thickness of medium weight, taking into account both temperature and lightness. Through the 'double-sided sanding' process, the fabric The surface presents a rich short-pile texture, which feels as soft and skin-friendly as cashmere, while retaining the sinewy feel of wool blending. The micro-check pattern is based on sand beige, interwoven with gray, brown, and blue yarns, and is woven through a yarn-dyed process. The micro-check pattern is uniform in size, delicate and unobtrusive, presenting a low-key retro charm. Process: The fabric goes through 3 sanding processes to ensure uniform pile length (about 0.3mm) and no obvious pilling. After sanding, it undergoes 'low temperature pre-shrinking' treatment to control the shrinkage within 2 to ensure stable size of the garment. Details 1. The collar is made of double-layer fabric and is three-dimensionally cut. The collar tip angle is controlled at 80°. The collar lining is fixed by hand sewing to ensure that it is stiff and not easy to deform. The length of the collar is set to 2CM below the standard waistline, which not only retains the neatness of the shirt, but also can be worn as a jacket. 2. The front buttons are horn buttons, with a unique amber texture on the surface. The button holes are sewn with 'hand-made keyhole' technology, and each hole is finely seamed to ensure durability. There are 2 horn buttons of the same series on the cuffs, which can be adjusted for tightness and fit the wrist line. Customized leather label It is made of calfskin, with a thickness of only 0.8mm, soft and elastic, and is slightly oiled to give it a warm matte luster. The Anagram pattern is embossed on the leather surface through precision imprinting at 120°C high temperature and 8kg/cm pressure, with a pattern depth of 0.2mm, clear and smooth lines, and no burrs on the edges. After imprinting, it is hand-polished to create a natural contrast between light and dark on the leather surface and enhance the three-dimensional sense of the pattern. Sizes S-XL,, loewe, jackets & coats,shirts,cowhide,19860909Loewe 羊毛混纺衬衫式外套 面料选择 采用精心配比的混纺面料,羊毛提供天然保暖与挺括廓形,马海毛赋予面料细腻蓬松的绒毛感,少量锦纶的喂入则增强耐磨性与抗皱性,三者融合打造中克重的理想厚度,兼顾温度与轻盈.通过“双面磨毛”工艺处理,面料表面呈现丰盈的短绒毛肌理,触感如羊绒般柔软亲肤,同时保留羊毛混纺的筋骨感.微型格纹图案以沙米色为基底,交织灰、棕、蓝三色纱线,通过色织工艺织就,微型格纹尺寸统一,细腻而不张扬,呈现低调的复古韵味. 工艺 面料经过3道磨毛工序,确保绒毛长度均匀（约0.3mm）,无明显起球现象.磨毛后进行“低温预缩”处理,将缩水率控制在2以内,保证成衣尺寸稳定. 细节 1衣领采用双层面料立体剪裁,领尖角度控制在80°,通过手工纳缝固定领衬,确保挺括不易变形.衣长设定为标准腰线以下2CM,既保留衬衫的利落感,又可作为外套单穿. 2前襟纽扣采用牛角扣,表面呈现独特的琥珀色纹理.纽扣孔以“手工锁眼”工艺缝制,每孔经细密锁边,确保耐用性.袖口处设2颗同系列牛角扣,可调节松紧,贴合手腕线条. 定制皮标 采用小牛皮,厚度仅0.8mm,质地柔软且富有弹性,经过轻微油润处理,呈现温润的哑光光泽.通过120℃高温、8kg/cm压力的精密压印,将Anagram图案压印于皮革表面,图案深度达0.2mm,线条清晰流畅,边缘无毛刺.压印后经过手工打磨,使皮革表面形成自然的明暗对比,增强图案的立体感. 尺码S-XL,,loewe,jackets & coats,shirts,cowhide,,Men's clothing
