NO:948915,.PRA cotton patchwork nylon sweatshirt (half-zip version) Fabric selection Dual-material segmented splicing is used. The stand-up collar and placket areas are made of high-density nylon fabric. The body, sleeves, hem, etc. are made of cotton knitted fabric. The nylon surface layer is made of high-density plain weave technology. The cloth surface has a delicate matte luster. The yarn is tight and tear-resistant, and is stain-resistant and easy to wipe. , it is stiff and not easy to wrinkle after being set, and it maintains a flat shape after being worn for a long time; the cotton knitted main body is woven with high-elastic cotton blended yarn, the fine knitted texture is soft and skin-friendly, with sufficient breathable pores, it can wick away perspiration during daily activities without being stuffy, it has a soft drape feeling, moderate elasticity and is not tight. (Both fabrics have been pre-shrunk, color-fixed and washed, and the shrinkage rate is uniform at the splicing points. Long-term wear will not cause length misalignment, whitening or fading.) Segmented alignment splicing process The pieces are pre-divided and cut, and the nylon pieces on the neckline and front chest are accurately aligned with the cotton body. Double-layer overlocking is used at the splicing. The outer double-threaded open thread is evenly reinforced. The stitch length is uniform and regular, which disperses the pulling force at the splicing area, greatly reducing the problems of thread breakage and layering warping during wearing and washing. There are no burrs inside and outside, and the splicing lines are smooth and smooth. Details 1. The one-piece stand-up collar is compositely sewn with double-layer nylon panels. The collar is shaped with multiple parallel open stitches to prevent it from collapsing or rolling. The middle is customized with a metal nylon half-zip opening and closing, and the zipper puller has a die-cast letter logo. The teeth bite smoothly without jamming. 2. The zipper pockets are inserted diagonally on both sides, and the pockets are double-layered with composite lock seams. They are matched with invisible zippers of the same color, and are reinforced with threads all around the pocket to prevent deformation and cracking when pulled. 3. The cuffs and hem are made of high-elastic cotton rib knitting of the same color, with double-layer folding and sewing. The elasticity is long-lasting and not easy to loosen and deform. It fits the wrists and waist and abdomen without being tight. It is windproof and temperature-locking during exercise. It is wear-resistant and anti-pilling at the bends. It will not loosen and curl after multiple washings. Accessories are one-to-one customized zipper pullers. One-to-one customized triangle logo. Size: S M L XL,, prada, hoodie, sweatshirts,19860909.PRA棉质拼接尼龙卫衣（半拉链版） 面料选择 采用双材质分段拼接,立领、门襟区域为高密尼龙面料,衣身、袖子、下摆等选用棉质针织面料.尼龙面层采用高密平纹梭织工艺,布面自带细腻哑光光泽,纱线紧实抗撕裂,且耐脏易擦拭,定型后挺括不易起皱,长久穿着保持平整版型；棉质针织主体选用高弹棉混纺纱线织造,细密针织肌理柔软亲肤,透气孔隙充足,日常活动排汗不闷身,自带柔和垂坠感,弹力适中不紧绷. (两种面料均经过预缩、固色水洗后整理,拼接处收缩率统一,长期穿着不会出现长短错位、发白掉色问题) 分段对位拼接工艺 裁片预先分区分料裁剪,领口、前胸尼龙裁片与棉质衣身精准对位,拼接处采用双层包缝锁边,外层双道明线均匀加固,针距统一规整,分散拼接处拉扯受力,大幅度降低穿洗断线、分层起翘问题,里外无毛边毛刺,拼接线条流畅平整. 细节 1、一体式立领采用双层尼龙裁片复合缝制,领口多道平行明线定型,不易软塌翻卷；中间定制金属尼龙半拉链开合,拉链头压铸字母标识,齿牙咬合顺滑不卡顿. 2、两侧斜插拉链口袋,袋片双层复合锁缝,搭配同色系隐形拉链,袋口四周满线加固,拉扯不易变形开裂. 3袖口、下摆采用高弹同色系棉质罗纹针织,双层对折车缝,弹力持久不易松弛变形,贴合手腕、腰腹不紧绷,运动时防风锁温,弯折处耐磨抗起球,多次洗涤不松垮卷边. 辅料一比一定制拉链头 一比一定制三角标 Size:S M L XL,,prada,hoodie,sweatshirts,,Men's clothing
